Specifying this option will make the server perform a database upgrade at start. A database upgrade will first compare the version number stored in the file VERSION in the database directory with the current server version.
If the two version numbers match, the server will start normally.
If the version number found in the database directory is higher than the version number the server is running, the server expects this is an unintentional downgrade and will warn about this. It will however start normally. Using the server in these conditions is however not recommended nor supported.
If the version number found in the database directory is lower than the version number the server is running, the server will check whether there are any upgrade tasks to perform. It will then execute all required upgrade tasks and print their statuses. If one of the upgrade tasks fails, the server will exit and refuse to start. Re-starting the server with the upgrade option will then again trigger the upgrade check and execution until the problem is fixed. If all tasks are finished, the server will start normally.
Whether or not this option is specified, the server will always perform a version check on startup. Running the server with a non-matching version number in the VERSION file will make the server refuse to start.
Runs the server as a daemon (as a background process). This parameter can only be set if the pid (process id) file is specified. That is, unless a value to the parameter pid-file is given, then the server will report an error and exit.
The default language ist used for sorting and comparing strings. The language value is a two-letter language code (ISO-639) or it is composed by a two-letter language code with and a two letter country code (ISO-3166). Valid languages are "de", "en", "en_US" or "en_UK".
The default default-language is set to be the system locale on that platform.
Executes the server in supervisor mode. In the event that the server unexpectedly terminates due to an internal error, the supervisor will automatically restart the server. Setting this flag automatically implies that the server will run as a daemon. Note that, as with the daemon flag, this flag requires that the pid-file parameter will set.
unix> ./arangod --supervisor --pid-file /var/run/arangodb.pid /tmp/vocbase/ 2012-06-27T15:58:28Z  INFO starting up in supervisor mode
As can be seen (e.g. by executing the ps command), this will start a supervisor process and the actual database process:
unix> ps fax | grep arangod 10137 ? Ssl 0:00 ./arangod --supervisor --pid-file /var/run/arangodb.pid /tmp/vocbase/ 10142 ? Sl 0:00 \_ ./arangod --supervisor --pid-file /var/run/arangodb.pid /tmp/vocbase/
When the database process terminates unexpectedly, the supervisor process will start up a new database process:
> kill -SIGSEGV 10142 > ps fax | grep arangod 10137 ? Ssl 0:00 ./arangod --supervisor --pid-file /var/run/arangodb.pid /tmp/vocbase/ 10168 ? Sl 0:00 \_ ./arangod --supervisor --pid-file /var/run/arangodb.pid /tmp/vocbase/
The name (identity) of the user the server will run as. If this parameter is not specified, the server will not attempt to change its UID, so that the UID used by the server will be the same as the UID of the user who started the server. If this parameter is specified, then the server will change its UID after opening ports and reading configuration files, but before accepting connections or opening other files (such as recovery files). This is useful when the server must be started with raised privileges (in certain environments) but security considerations require that these privileges be dropped once the server has started work.
Observe that this parameter cannot be used to bypass operating system security. In general, this parameter (and its corresponding relative gid) can lower privileges but not raise them.
The name (identity) of the group the server will run as. If this parameter is not specified, then the server will not attempt to change its GID, so that the GID the server runs as will be the primary group of the user who started the server. If this parameter is specified, then the server will change its GID after opening ports and reading configuration files, but before accepting connections or opening other files (such as recovery files).
This parameter is related to the parameter uid.
The name of the process ID file to use when running the server as a daemon. This parameter must be specified if either the flag daemon or supervisor is set.
No requests can be made to the server in this mode, and the only way to work with the server in this mode is by using the emergency console. Note that the server cannot be started in this mode if it is already running in this or another mode.
The argument is an integer (1,2,3 or 4) which sets the manner in which random numbers are generated. The default method (3) is to use the a non-blocking random (or pseudorandom) number generator supplied by the operating system.
Specifying an argument of 2, uses a blocking random (or pseudorandom) number generator. Specifying an argument 1 sets a pseudorandom number generator using an implication of the Mersenne Twister MT19937 algorithm. Algorithm 4 is a combination of the blocking random number generator and the Mersenne Twister.
Setting this option to false will turn off authentication on the server side
so all clients can execute any action without authorization and privilege
The default value is true.
ArangoDB will use JWTs to authenticate requests. Using this option lets you specify a JWT.
In single server setups and when not specifying this secret ArangoDB will generate a secret.
In cluster deployments which have authentication enabled a secret must be set consistently across all cluster tasks so they can talk to each other.
Enable/disable authentication for UNIX domain sockets
Setting value to true will turn off authentication on the server side for requests coming in via UNIX domain sockets. With this flag enabled, clients located on the same host as the ArangoDB server can use UNIX domain sockets to connect to the server without authentication. Requests coming in by other means (e.g. TCP/IP) are not affected by this option.
The default value is false.
Note: this option is only available on platforms that support UNIX domain sockets.
Enable/disable authentication for system API requests only
Controls whether incoming requests need authentication only if they are
directed to the ArangoDB's internal APIs and features, located at
If the flag is set to true, then HTTP authentication is only
required for requests going to URLs starting with /_, but not for other
URLs. The flag can thus be used to expose a user-made API without HTTP
authentication to the outside world, but to prevent the outside world from
using the ArangoDB API and the admin interface without authentication.
Note that checking the URL is performed after any database name prefix
has been removed. That means when the actual URL called is
/_db/_system/myapp/myaction, the URL /myapp/myaction will be used for
The default is true.
Note that authentication still needs to be enabled for the server regularly
in order for HTTP authentication to be forced for the ArangoDB API and the
web interface. Setting only this flag is not enough.
You can control ArangoDB's general authentication feature with the
Enable/disable replication applier
If false the server will start with replication appliers turned off, even if the replication appliers are configured with the autoStart option. Using the command-line option will not change the value of the autoStart option in the applier configuration, but will suppress auto-starting the replication applier just once.
If the option is not used, ArangoDB will read the applier configuration from the file REPLICATION-APPLIER-CONFIG on startup, and use the value of the autoStart attribute from this file.
The default is true.
Allows to specify the timeout for HTTP keep-alive connections. The timeout value must be specified in seconds. Idle keep-alive connections will be closed by the server automatically when the timeout is reached. A keep-alive-timeout value 0 will disable the keep alive feature entirely.
Hide Product header
If true, the server will exclude the HTTP header "Server: ArangoDB" in HTTP responses. If set to false, the server will send the header in responses.
The default is false.
Allow method override
When this option is set to true, the HTTP request method will optionally be fetched from one of the following HTTP request headers if present in the request:
If the option is set to true and any of these headers is set, the request method will be overridden by the value of the header. For example, this allows issuing an HTTP DELETE request which to the outside world will look like an HTTP GET request. This allows bypassing proxies and tools that will only let certain request types pass.
Setting this option to true may impose a security risk so it should only be used in controlled environments.
The default value for this option is false.
Specifies the number of threads that are spawned to handle requests.
Toggling server statistics
If this option is value is false, then ArangoDB's statistics gathering is turned off. Statistics gathering causes regular CPU activity so using this option to turn it off might relieve heavy-loaded instances a bit.
time to live for server sessions
The timeout for web interface sessions, using for authenticating requests to the web interface (/_admin/aardvark) and related areas.
Sessions are only used when authentication is turned on.
enable or disable the Foxx queues feature
If true, the Foxx queues will be available and jobs in the queues will
be executed asynchronously.
The default is true.
When set to
false the queue manager will be disabled and any jobs
are prevented from being processed, which may reduce CPU load a bit.
Foxx queues poll interval
poll interval for Foxx queues
The poll interval for the Foxx queues manager. The value is specified in
seconds. Lower values will mean more immediate and more frequent Foxx
queue job execution, but will make the queue thread wake up and query the
queues more often. When set to a low value, the queue thread might cause
The default is 1 second. If Foxx queues are not used much, then this
value may be increased to make the queues thread wake up less.
The directory containing the collections and datafiles. Defaults to /var/lib/arango. When specifying the database directory, please make sure the directory is actually writable by the arangod process.
You should further not use a database directory which is provided by a network filesystem such as NFS. The reason is that networked filesystems might cause inconsistencies when there are multiple parallel readers or writers or they lack features required by arangod (e.g. flock()).
When using the command line version, you can simply supply the database directory as argument.
> ./arangod --server.endpoint tcp://127.0.0.1:8529 --database.directory /tmp/vocbase
Maximal size of journal in bytes. Can be overwritten when creating a new
collection. Note that this also limits the maximal size of a single
The default is 32MB.
Wait for sync
default wait for sync behavior
Default wait-for-sync value. Can be overwritten when creating a new
The default is false.
Force syncing of properties
force syncing of collection properties to disk
Force syncing of collection properties to disk after creating a collection
or updating its properties.
If turned off, no fsync will happen for the collection and database
properties stored in
parameter.json files in the file system. Turning
off this option will speed up workloads that create and drop a lot of
collections (e.g. test suites).
The default is true.
Limiting memory for AQL queries
The default maximum amount of memory (in bytes) that a single AQL query can use. When a single AQL query reaches the specified limit value, the query will be aborted with a resource limit exceeded exception. In a cluster, the memory accounting is done per shard, so the limit value is effectively a memory limit per query per shard.
The global limit value can be overriden per query by setting the memoryLimit option value for individual queries when running an AQL query.
The default value is 0, meaning that there is no memory limit.
Enable/disable AQL query tracking
If true, the server's AQL slow query tracking feature will be enabled by default. Tracking of queries can be disabled by setting the option to false.
The default is true.
Threshold for slow AQL queries
By setting value it can be controlled after what execution time an AQL query
is considered "slow". Any slow queries that exceed the execution time specified
in value will be logged when they are finished. The threshold value is
specified in seconds. Tracking of slow queries can be turned off entirely by
setting the option
--query.tracking to false.
The default value is 10.0.
Throw collection not loaded error
Accessing a not-yet loaded collection will automatically load a collection on first access. This flag controls what happens in case an operation would need to wait for another thread to finalize loading a collection. If set to true, then the first operation that accesses an unloaded collection will load it. Further threads that try to access the same collection while it is still loading will get an error (1238, collection not loaded). When the initial operation has completed loading the collection, all operations on the collection can be carried out normally, and error 1238 will not be thrown.
If set to false, the first thread that accesses a not-yet loaded collection will still load it. Other threads that try to access the collection while loading will not fail with error 1238 but instead block until the collection is fully loaded. This configuration might lead to all server threads being blocked because they are all waiting for the same collection to complete loading. Setting the option to true will prevent this from happening, but requires clients to catch error 1238 and react on it (maybe by scheduling a retry for later).
The default value is false.
AQL Query caching mode
Toggles the AQL query cache behavior. Possible values are:
- off: do not use query cache
- on: always use query cache, except for queries that have their cache attribute set to false
- demand: use query cache only for queries that have their cache attribute set to true
AQL Query cache size
Maximum number of query results that can be stored per database-specific query cache. If a query is eligible for caching and the number of items in the database's query cache is equal to this threshold value, another cached query result will be removed from the cache.
This option only has an effect if the query cache mode is set to either on or demand.
Specifies the number of background threads for index creation. When a collection contains extra indexes other than the primary index, these other indexes can be built by multiple threads in parallel. The index threads are shared among multiple collections and databases. Specifying a value of 0 will turn off parallel building, meaning that indexes for each collection are built sequentially by the thread that opened the collection. If the number of index threads is greater than 1, it will also be used to built the edge index of a collection in parallel (this also requires the edge index in the collection to be split into multiple buckets).
Garbage collection frequency (time-based)
Garbage collection interval (request-based)
Options need to be passed in one string, with V8 option names being prefixed with double dashes. Multiple options need to be separated by whitespace. To get a list of all available V8 options, you can use the value "--help" as follows:
Another example of specific V8 options being set at startup:
Names and features or usable options depend on the version of V8 being used, and might change in the future if a different version of V8 is being used in ArangoDB. Not all options offered by V8 might be sensible to use in the context of ArangoDB. Use the specific options only if you are sure that they are not harmful for the regular database operation.