To reload data from a dump previously created with arangodump, ArangoDB provides the arangorestore tool.
Please note that arangorestore must not be used to create several similar database instances in one installation.
This means if you have an arangodump output of database
a, and you create a second database
on the same instance of ArangoDB, and restore the dump of
b - data integrity can not
Reloading Data into an ArangoDB database
arangorestore can be invoked from the command-line as follows:
unix> arangorestore --input-directory "dump"
This will connect to an ArangoDB server and reload structural information and documents found in the input directory dump. Please note that the input directory must have been created by running arangodump before.
arangorestore will by default connect to the _system database using the default endpoint. If you want to connect to a different database or a different endpoint, or use authentication, you can use the following command-line options:
: name of the database to connect to
: endpoint to connect to
: password to use (omit this and you'll be prompted for the password)
: whether or not to use authentication
Since version 2.6 arangorestore provides the option --create-database. Setting this option to true will create the target database if it does not exist. When creating the target database, the username and passwords passed to arangorestore (in options --server.username and --server.password) will be used to create an initial user for the new database.
Here's an example of reloading data to a non-standard endpoint, using a dedicated database name:
unix> arangorestore --server.endpoint tcp://192.168.173.13:8531 --server.username backup --server.database mydb --input-directory "dump"
To create the target database whe restoring, use a command like this:
unix> arangorestore --server.username backup --server.database newdb --create-database true --input-directory "dump"
arangorestore will print out its progress while running, and will end with a line showing some aggregate statistics:
Processed 2 collection(s), read 2256 byte(s) from datafiles, sent 2 batch(es)
By default, arangorestore will re-create all non-system collections found in the input directory and load data into them. If the target database already contains collections which are also present in the input directory, the existing collections in the database will be dropped and re-created with the data found in the input directory.
The following parameters are available to adjust this behavior:
: set to true to create collections in the target database. If the target database already contains a collection with the same name, it will be dropped first and then re-created with the properties found in the input directory. Set to false to keep existing collections in the target database. If set to false and arangorestore encounters a collection that is present in both the target database and the input directory, it will abort. The default value is true.
: set to true to load document data into the collections in the target database. Set to false to not load any document data. The default value is true.
: whether or not to include system collections when re-creating collections or reloading data. The default value is false.
For example, to (re-)create all non-system collections and load document data into them, use:
unix> arangorestore --create-collection true --import-data true --input-directory "dump"
This will drop potentially existing collections in the target database that are also present in the input directory.
To include system collections too, use --include-system-collections true:
unix> arangorestore --create-collection true --import-data true --include-system-collections true --input-directory "dump"
To (re-)create all non-system collections without loading document data, use:
unix> arangorestore --create-collection true --import-data false --input-directory "dump"
This will also drop existing collections in the target database that are also present in the input directory.
To just load document data into all non-system collections, use:
unix> arangorestore --create-collection false --import-data true --input-directory "dump"
To restrict reloading to just specific collections, there is is the --collection option. It can be specified multiple times if required:
unix> arangorestore --collection myusers --collection myvalues --input-directory "dump"
Collections will be processed by in alphabetical order by arangorestore, with all document collections being processed before all edge collections. This is to ensure that reloading data into edge collections will have the document collections linked in edges (_from and _to attributes) loaded.
See arangodump for details.
Restoring Revision Ids and Collection Ids
arangorestore will reload document and edges data with the exact same _key, _from and _to values found in the input directory. However, when loading document data, it will assign its own values for the _rev attribute of the reloaded documents. Though this difference is intentional (normally, every server should create its own _rev values) there might be situations when it is required to re-use the exact same _rev values for the reloaded data. This can be achieved by setting the --recycle-ids parameter to true:
unix> arangorestore --collection myusers --collection myvalues --recycle-ids true --input-directory "dump"
Note that setting --recycle-ids to true will also cause collections to be (re-)created in the target database with the exact same collection id as in the input directory. Any potentially existing collection in the target database with the same collection id will then be dropped.
Setting --recycle-ids to false or omitting it will only use the collection name from the input directory and allow the target database to create the collection with a different id (though with the same name) than in the input directory.
Reloading Data into a different Collection
With some creativity you can use arangodump and arangorestore to transfer data from one collection into another (either on the same server or not). For example, to copy data from a collection myvalues in database mydb into a collection mycopyvalues in database mycopy, you can start with the following command:
unix> arangodump --collection myvalues --server.database mydb --output-directory "dump"
This will create two files, myvalues.structure.json and myvalues.data.json, in the output directory. To load data from the datafile into an existing collection mycopyvalues in database mycopy, rename the files to mycopyvalues.structure.json and mycopyvalues.data.json. After that, run the following command:
unix> arangorestore --collection mycopyvalues --server.database mycopy --input-directory "dump"
Using arangorestore with sharding
As of Version 2.1 the arangorestore tool supports sharding. Simply point it to one of the coordinators in your cluster and it will work as usual but on sharded collections in the cluster.
If arangorestore is asked to drop and re-create a collection, it will use the same number of shards and the same shard keys as when the collection was dumped. The distribution of the shards to the servers will also be the same as at the time of the dump. This means in particular that DBservers with the same IDs as before must be present in the cluster at time of the restore.
If a collection was dumped from a single instance, one can manually add the structural description for the shard keys and the number and distribution of the shards and then the restore into a cluster will work.
If you restore a collection that was dumped from a cluster into a single ArangoDB instance, the number of shards and the shard keys will silently be ignored.
Note that in a cluster, every newly created collection will have a new ID, it is not possible to reuse the ID from the originally dumped collection. This is for safety reasons to ensure consistency of IDs.
Restoring collections with sharding prototypes
arangorestore will yield an error, while trying to restore a collection, whose shard distribution follows a collection, which does not exist in the cluster and which was not dumped along:
unix> arangorestore --collection clonedCollection --server.database mydb --input-directory "dump" ERROR got error from server: HTTP 500 (Internal Server Error): ArangoError 1486: must not have a distributeShardsLike attribute pointing to an unknown collection Processed 0 collection(s), read 0 byte(s) from datafiles, sent 0 batch(es)
The collection can be restored by overriding the error message as follows:
unix> arangorestore --collection clonedCollection --server.database mydb --input-directory "dump" --ignore-distribute-shards-like-errors
Restore into an authentication enabled ArangoDB
Of course you can restore data into a password protected ArangoDB as well. However this requires certain user rights for the user used in the restore process. The rights are described in detail in the Managing Users chapter. For restore this short overview is sufficient:
- When importing into an existing database, the given user needs
Administrateaccess on this database.
- When creating a new Database during restore, the given user needs
_system. The user will be promoted with
Administrateaccess on the newly created database.