SatelliteGraph Management

This chapter describes the satellite-graph module, the JavaScript API to create and modify your SatelliteGraphs in ArangoDB.

To generally understand the concept of the graph modules please see General Graph Management first. In the following only the overloaded functionality is described. Everything else works alike in both modules.

Create a Graph

In contrast to General Graphs and SmartGraphs, you do not need to take care of the sharding and replication properties. The properties distributeShardsLike, replicationFactor and numberOfShards will be set automatically (also see prototype collection).

The format of the relations is identical.

var graph_module = require("@arangodb/satellite-graph");
graph_module._create(graphName, edgeDefinitions, orphanCollections);

• graphName (string): Unique identifier of the graph
• edgeDefinitions (array): List of relation definition objects, may be empty
• orphanCollections (array): List of additional vertex collection names, may be empty

Both edgeDefinitions and orphanCollections are optional. You can also add collections later, after the SatelliteGraph creation took place.

The edgeDefinitions can be created using the convenience method _relation() known from the general-graph module, which is also available here.

orphanCollections again is just a list of additional vertex collections which are not yet connected via edges but should follow the same sharding to be connected later on.

All collections used within the creation process are newly created or, if already available, checked against the collection properties. The process will fail if one of them already exists, unless they have the correct sharding already. All newly created collections will immediately be dropped again in the failure case.

Examples

Create a graph without relations. Edge definitions can be added later:

var satelliteGraphModule = require("@arangodb/satellite-graph");
var graph = satelliteGraphModule._create("satelliteGraph");
satelliteGraphModule._graph("satelliteGraph");

{[SatelliteGraph] 
}

Create a graph using an edge collection edges and a single vertex collection vertices as relation:

var graph_module = require("@arangodb/satellite-graph");
var edgeDefinitions = [ graph_module._relation("edges", "vertices", "vertices") ];
var graph = graph_module._create("myGraph", edgeDefinitions);
graph = graph_module._graph("myGraph");

{[SatelliteGraph] 
  "edges" : [ArangoCollection 6010913, "edges" (type edge, status loaded)], 
  "vertices" : [ArangoCollection 6010911, "vertices" (type document, status loaded)] 
}

Create a graph with edge definitions and orphan collections:

var graph_module = require("@arangodb/satellite-graph");
var edgeDefinitions = [ graph_module._relation("myRelation", ["male", "female"], ["male", "female"]) ];
var graph = graph_module._create("myGraph", edgeDefinitions, ["sessions"]);
graph = graph_module._graph("myGraph");

{[SatelliteGraph] 
  "myRelation" : [ArangoCollection 6010926, "myRelation" (type edge, status loaded)], 
  "female" : [ArangoCollection 6010925, "female" (type document, status loaded)], 
  "male" : [ArangoCollection 6010924, "male" (type document, status loaded)], 
  "sessions" : [ArangoCollection 6010922, "sessions" (type document, status loaded)] 
}

Modify a SatelliteGraph definition at runtime

After you have created a SatelliteGraph its definition is not immutable. You can still add or remove relations. This is again identical to General Graphs.

However there is one important difference: You can only add collections that either do not exist, or that have been created with the correct collection properties (either through the graph module or manually).

Remove a vertex collection

Remove a vertex collection from the graph:

graph._removeVertexCollection(vertexCollectionName, dropCollection)

• vertexCollectionName (string): Name of vertex collection.
• dropCollection (bool, optional): If true the collection will be dropped if it is not used in any other graph. Default: false.

In most cases this function works identically to the General Graph one. But there is one special case: The first vertex collection added to the graph (either orphan or a vertex collection within a relation) defines the sharding for all collections within the graph. They have their distributeShardsLike attribute set to the name of the prototype collection This collection cannot be dropped as long as other collections follow its sharding (i.e. they need to be dropped first).

Examples

Create a SatelliteGraph and list its orphan collections:

var graph_module = require("@arangodb/satellite-graph");
var relation = graph_module._relation("edges", "vertices", "vertices");
var graph = graph_module._create("myGraph", [relation], ["other"]);
graph._orphanCollections();

[ 
  "other" 
]

Remove the orphan collection from the SatelliteGraph and drop the collection:

graph._removeVertexCollection("other", true);
graph = graph_module._graph("myGraph");

{[SatelliteGraph] 
  "edges" : [ArangoCollection 6010961, "edges" (type edge, status loaded)], 
  "vertices" : [ArangoCollection 6010958, "vertices" (type document, status loaded)] 
}

Attempting to remove a non-orphan collection results in an error:

graph._removeVertexCollection("vertices"); 

[ArangoError 1928: collection is not in list of orphan collections]

You cannot drop the prototype collection (vertices) as long as it defines the sharding for other collections (edges).

var graph_module = require("@arangodb/satellite-graph");
var relation = graph_module._relation("edges", "vertices", "vertices");
var graph = graph_module._create("myGraph", [relation], []);
graph._deleteEdgeDefinition("edges");
graph._removeVertexCollection("vertices");
db._drop("vertices"); 

[ArangoError 1485: Collection 'vertices' must not be dropped while 'edges' has distributeShardsLike set to 'vertices'.]

You may drop the complete graph including the underlying collections by setting the second argument in the call to _drop() to true. This will only drop collections that are in the graph definition at that point. Remember to manually drop collections that you might have removed from the graph beforehand.

var graph_module = require("@arangodb/satellite-graph");
var relation = graph_module._relation("edges", "vertices", "vertices");
var graph = graph_module._create("myGraph", [relation], []);
graph._deleteEdgeDefinition("edges");      // Remove edge collection from graph definition
graph._removeVertexCollection("vertices"); // Remove vertex collection from graph definition
graph_module._drop("myGraph", true);       // Does not drop any collections because none are left in the graph definition
db._drop("edges"); // Manually clean up the collections that were left behind, drop 'edges' before sharding-defining 'vertices' collection
db._drop("vertices");

Empty Output

Alternatively, you can truncate() all collections of the graph if you just want to get rid of the data but keep the collections and graph definition.

Remove an edge collection

Delete an edge definition from the graph:

graph._deleteEdgeDefinition(edgeCollectionName, dropCollection)

• edgeCollectionName (string): Name of edge collection.
• dropCollection (bool, optional): If true the collection will be dropped if it is not used in any other graph. Default: false.

Examples

Create a SatelliteGraph, then delete the edge definition and drop the edge collection:

var graph_module = require("@arangodb/satellite-graph");
var relation = graph_module._relation("edges", "vertices", "vertices");
var graph = graph_module._create("myGraph", [relation], []);
graph._deleteEdgeDefinition("edges", true);
graph = graph_module._graph("myGraph");

{[SatelliteGraph] 
  "vertices" : [ArangoCollection 6011002, "vertices" (type document, status loaded)] 
}

It is allowed to remove the vertex collection vertices if it is not used in any relation (i.e. after the deletion of the edge definition):

graph._deleteEdgeDefinition("edges");
graph._removeVertexCollection("vertices");

Empty Output

Keep in mind that you cannot drop the vertices collection until no other collection references it anymore (distributeShardsLike collection property).

Remove a Graph

Remove a SatelliteGraph:

graph_module._drop(graphName, dropCollections)

• graphName (string): Name of the Graph.
• dropCollections (bool, optional): Define if collections should be dropped. Default: false.

Examples

Delete a SatelliteGraph and drop its collections:

graph_module._drop("myGraph", true);

Empty Output

Note that removing a graph with the option to drop the collections fails if you removed collections from the graph but did not drop these collections. This is because their distributeShardsLike attribute still references collections that are part of the graph. Dropping collections while others point to them in this way is not allowed. Make sure to drop the referencing collections first.

graph._removeVertexCollection("other");
graph_module._drop("myGraph", true); 

[ArangoError 1485: Collection 'vertices' must not be dropped while 'other' has distributeShardsLike set to 'vertices'.]