ArangoDB Starter Options

The Starter provides options to control various aspects of a cluster or other deployment you want to run

Common options

  • --starter.data-dir=path

path is the directory in which all data is stored. (default “./”)

In the directory, a setup.json file is created, which is used for restarts, as well as a directory for each instance that runs on this machine. Different instances of arangodb must use different data directories.

  • --starter.join=address

Join a cluster with the leader (master) Starter at address address (default “”). You can also point to any other Starter that is connected to the initial Starter. The address can be a host address or name, optionally followed by a port number to match another Starter’s --starter.port if it is not the default 8528.

These are valid arguments, for example:

--starter.join=localhost
--starter.join=localhost:5678
--starter.join=192.168.23.1:8528
--starter.join=192.168.23.1

You can also supply multiple addresses. See Using multiple join arguments for details.

  • --starter.local

Start a local (test) cluster. Since all servers are running on a single machine this is really not intended for production setups.

  • --starter.mode=cluster|single

Select what kind of database configuration you want. This can be a cluster configuration (which is the default) or a single server configuration.

Note that when running a single server configuration you lose all high availability features that a cluster provides you.

  • --cluster.agency-size=int

number of Agents in Agency (default 3).

This number has to be positive and odd, and anything beyond 5 probably does not make sense. The default 3 allows for the failure of one Agent.

  • --starter.address=addr

addr is the address under which this server is reachable from the outside.

Use this option only in the case that --cluster.agency-size is set to 1. In a single Agent setup, the sole starter has to start on its own with no reliable way to learn its own address. Using this option, the leader (master) Starter knows under which address it can be reached from the outside. If you specify localhost here, then all instances must run on the local machine.

  • --starter.host=addr

addr is the address to which this server binds. (default “0.0.0.0”)

Usually there is no need to specify this option. Only when you want to bind the starter to specific network device, would you set this. Note that setting this option to 127.0.0.1 makes this starter unreachable for other starters, which is only allowed for single server deployments or when using --starter.local.

  • --docker.image=image

image is the name of a Docker image to run instead of the normal executable. For each started instance a Docker container is launched. Usually one would use the Docker image arangodb/arangodb.

  • --docker.container=containerName

containerName is the name of a Docker container that is used to run the executable. If you do not provide this argument but run the starter inside a Docker container, the starter auto-detects its container name.

Authentication options

The arango starter by default creates a cluster that uses no authentication.

To create a cluster that uses authentication, create a file containing a random JWT secret (single line) and pass it through the --auth.jwt-secret option.

For example:

arangodb create jwt-secret --secret=jwtSecret
arangodb --auth.jwt-secret=./jwtSecret

All starters used in the cluster must have the same JWT secret.

To use a JWT secret to access the database, use arangodb auth header. See Using authentication tokens for details.

SSL options

The ArangoDB Starter creates a cluster that uses unencrypted connections by default (no SSL/TLS).

To create a cluster that uses encrypted connections, you can use an existing server key file (.pem format) or let the starter create one for you.

To use an existing server key file use the --ssl.keyfile option like this:

arangodb --ssl.keyfile=myServer.pem

Use arangodb create tls keyfile to create a server key file.

To let the starter created a self-signed server key file, use the --ssl.auto-key option like this:

arangodb --ssl.auto-key

All starters used to make a cluster must be using SSL or not. You cannot have one starter using SSL and another not using SSL.

If you start a starter using SSL, its own HTTP server (see API) also uses SSL.

Note that all starters can use different server key files.

Additional SSL options:

  • --ssl.cafile=path

Configure the servers to require a client certificate in their communication to the servers using the CA certificate in a file with given path.

  • --ssl.auto-server-name=name

The name of the server that is used in the self-signed certificate created by the --ssl.auto-key option.

  • --ssl.auto-organization=name

The name of the server that is used in the self-signed certificate created by the --ssl.auto-key option.

Passing through other database options

Options for arangod that are not supported by the starter can still be passed to the DB-Servers using a pass through option. Every option that start with a pass through prefix is passed through to the command-line of one or more server instances.

  • --args.all.<section>.<key>=<value> is passed as --<section>.<key>=<value> to all servers started by this starter.
  • --args.coordinators.<section>.<key>=<value> is passed as --<section>.<key>=<value> to all Coordinators started by this starter.
  • --args.dbservers.<section>.<key>=<value> is passed as --<section>.<key>=<value> to all DB-Servers started by this starter.
  • --args.agents.<section>.<key>=<value> is passed as --<section>.<key>=<value> to all Agents started by this starter.

Some options are essential to the function of the starter. Therefore these options cannot be passed through like this.

Example:

To activate HTTP request logging at debug level for all Coordinators, use a command like this:

arangodb --args.coordinators.log.level=requests=debug

Passing environment variables

Environment variables by default gonna be passed from arangodb process by default. However, variables can be overridden using arangodb command line option.

  • --envs.<group>.<env name>=<value>
  • --envs.all.ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=2G sets ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=2G for all instances started by this starter.
  • --envs.coordinators.ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=4G sets ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=4G for all Coordinators started by this starter.
  • --envs.dbservers.ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=8G sets ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=8G for all DB-Servers started by this starter.

Example:

arangodb --envs.all.ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=2G --envs.coordinators.ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=4G --envs.dbservers.ARANGODB_OVERRIDE_DETECTED_TOTAL_MEMORY=8G ...

Miscellaneous options

  • --version

Show the version of the starter.

  • --starter.port=int

The network port for the Starter (default 8528). This is the port used for communication of the arangodb instances amongst each other.

The Starter uses the subsequent ports for the arangod processes it starts.

  • --starter.disable-ipv6=bool

If disabled, the starter configures the arangod servers to bind to address 0.0.0.0 (all IPv4 interfaces) instead of binding to [::] (all IPv4 and all IPv6 interfaces).

This is useful when IPv6 has actively been disabled on your machine.

  • --server.arangod=path

The path to the arangod executable (default varies from platform to platform, an executable is searched in various places).

This option only has to be specified if the standard search fails.

  • --server.js-dir=path

The path to JavaScript library directory (default varies from platform to platform, this is coupled to the search for the executable).

This option only has to be specified if the standard search fails.

  • --server.storage-engine=rocksdb

Sets the storage engine used by the arangod servers. Defaults to rocksdb, which is also the only available option for ArangoDB v3.7 and above.

  • --cluster.start-coordinator=bool

This indicates whether or not a Coordinator instance should be started (default true).

  • --cluster.start-dbserver=bool

This indicates whether or not a DB-Server instance should be started (default true).

  • --server.rr=path

The path to the rr executable to use if non-empty (default “”). Expert and debugging only.

  • --log.color=bool

If set to true, console log output is colorized. The default is true when a terminal is attached to stdin, false otherwise.

  • --log.console=bool

If set to true, log output is written to the console (default true).

  • --log.file=bool

If set to true, log output is written to the file (default true). The log file, called arangodb.log, can be found in the directory specified using --log.dir or if that is not set, the directory specified using --starter.data-dir.

  • --log.verbose=bool

show more information (default false).

  • --log.dir=path

Set a custom directory to which all log files are written to. When using the Starter in docker, make sure that this directory is mounted as a volume for the Starter.

Note: When using a custom log directory, all DB-Server files are named like arangod-<role>-<port>.log. The log for the starter itself is still called arangodb.log.

  • --log.rotate-files-to-keep=int

Set the number of old log files to keep when rotating log files of server components (default 5).

  • --log.rotate-interval=duration

Set the interval between rotations of log files of server components (default 24h). Use a value of 0 to disable automatic log rotation.

Note: The starter always performs log rotation when it receives a HUP signal.

  • --starter.unique-port-offsets=bool

If set to true, all port offsets (of follower Starters) are made globally unique. By default, the value is false and port offsets are unique per follower address only.

  • --docker.user=user

user is an expression to be used for docker run with the --user option. One can give a user id or a user id and a group id, separated by a colon. The purpose of this option is to limit the access rights of the process in the Docker container.

  • --docker.endpoint=endpoint

endpoint is the URL used to reach the docker host. This is needed to run the executable in docker. The default value is “unix:///var/run/docker.sock”.

  • --docker.imagePullPolicy=Always|IfNotPresent|Never

docker.imagePullPolicy determines if the Docker image is being pulled from Docker Hub.

  • If set to Always, the image is always pulled and an error causes the starter to fail.
  • If set to IfNotPresent, the image is not pull if it is always available locally.
  • If set to Never, the image is never pulled (when it is not available locally an error occurs).

The default value is Always is the docker.image has the :latest tag or IfNotPresent otherwise.

  • --docker.net-mode=mode

If docker.net-mode is set, all Docker container are started with the --net=<mode> option.

  • --docker.privileged=bool

If docker.privileged is set, all Docker containers are started with the --privileged option turned on.

  • --docker.tty=bool

If docker.tty is set, all Docker containers are started with a TTY. If the starter itself is running in a docker container without a TTY this option is overwritten to false.

  • --starter.debug-cluster=bool

If starter.debug-cluster is set, the starter records the status codes it receives upon “server ready” requests to the log. This option is mainly intended for internal testing.

Starting and stopping in detached mode

If you want the starter to detach and run as a background process, use the start command. This is typically used by developers running tests only.

arangodb start --starter.local=true [--starter.wait]

This command makes the Starter run another starter process in the background (that starts all ArangoDB servers), wait for its HTTP API to be available and then exit. The Starter that was started in the background keeps running until you stop it.

The --starter.wait option makes the start command wait until all ArangoDB servers are really up before ending the process of the leader Starter.

To stop a Starter, use this command:

arangodb stop

Make sure to match the arguments given to start the Starter (--starter.port & --ssl.*).

Environment variables

It is possible to replace all command-line arguments for the starter with environment variables. To do so, set an environment variable named ARANGODB_ + <name of command line option in uppercase>, where all dashes, underscores and dots are replaced with underscores.

For example,

ARANGODB_DOCKER_TTY=true arangodb

is equal to:

arangodb --docker.tty=true

On this page